Fences Dallas

Beautiful enclosing structures for country houses

Types of enclosing structures for a country house

+1 710-000-0000
+1 710-000-0010

How does the paint used to paint corrugated sheets behave over time?

When applying the surface paint layer, a special composition is used that is resistant to aggressive environments. The painted surface does not change its tone for a long time. The paint composition and the method of its application were developed so that the metal does not lose its original appearance over the years under the influence of moisture, temperature changes and other aggressive factors.

made of red stone Dallas of different textures

Which fence is better to choose for a summer house?

If you need an inexpensive fence, pay attention to the chain-link mesh. In cases where the fence goes onto the roadway, it is better to order a fence made of corrugated sheet metal. This solution will hide the territory from prying eyes, reduce the level of noise and dust penetration.

fence made of blocks 190x190x360 Dallas two types of texture

What kind of fence to buy for a summer house? (inexpensive fence)

If you need an inexpensive fence, pay attention to fences made of chain-link mesh. In cases where the fence goes onto the roadway, it is better to order a fence made of corrugated sheet metal. This solution will hide the territory from prying eyes, reduce the level of noise and dust penetration and will affect the quality of the fences. You can also offer a beautiful forged fence.

fence made of sand-colored stone, Len-village Dallas of different textures

Fences Dallas

Beautiful and reliable fences.
Picket fence

A fence made of picket fences painted the same on both sides is distinguished by its originality. It is screwed to the opposite sides of the plank along the marks in a checkerboard pattern. This type of fence has low windage, but it perfectly protects the area from prying eyes and looks like a solid fence. The main advantages of a picket fence design include:
Durability. The service life of a fence with a double protective coating is 50 years.
Strength. Steel planks with stiffeners have high strength characteristics and can withstand significant bending loads.
Repairability. If the slats in the span are deformed, there is no need to replace the entire span. It is enough to replace the broken slat with a new one.
Picket fences are produced in various colors, so you can buy both single-color slats and those with a textured “wood-like” pattern.
The negative aspects include: the high cost of building materials and fasteners, as well as the special precision required when performing installation work.

Enclosing structures made of profile pipes

For the construction of the fence, 20x20 mm profile pipes are used, and for the logs - 40x20 mm rolled pipes. For the supports, it is necessary to take a 60x60 mm profile pipe. To build spans, you will need to use a welding machine.
The fence can have a different design solution: the pipes can be located in parallel or mounted in a complex geometric pattern. Such a fence is often decorated with peaks or elements made of wrought iron. To increase corrosion resistance, the structure is treated with primer-enamel or paints and varnishes.
The main advantages of this type of fencing include:
high protective characteristics;
inertness to atmospheric phenomena;
strength and long service life.
The negative aspects include the visibility of the site, so you will not be able to hide it from prying eyes. To solve this disadvantage, it is necessary to cover some of the sections with opaque polycarbonate sheets, that is, to build a combined structure.

Gallery of block fences in Dallas.

made of cream blocks of different textures, a column of cream crushed stones, Dallas

made of cream blocks /120*190*380/ of different textures, a column of cream crushed stones /280*190*380/, Dallas

Made of white blocks /110*190*390/, height 1.4 m, Dallas 1

Made of smooth peach and brown blocks /170*170*360/, pillar made of smooth brown cameos, decorative inserts at the top, Dallas

Made of light gray smooth and crushed stones /120*190*380/, pillar of light gray crushed stones /280*190*280/, white covers /350*350/, Dallas

Made of sand blocks /120*190*380/, pillar made of sand ordinary cameos /280*280*1900/, Dallas

Made of yellow concrete blocks /170*170*360/, pillar two yellow concrete blocks /170*170*360/, Dallas

Fence and garages made of beige concrete blocks /120*190*380/, pillar made of brown stones /380*190*280/, Dallas

Made of gray concrete blocks /120*190*360/, the pillar consists of two types of gray stones: crushed and smooth, Dallas

Filling the spans

The most popular and widespread material for building fences is a profile sheet. The sheets are attached to the joists with an overlap using screws or rivets, or the profile sheet is used to make welded sections. Steel angles and profile pipes are used to make frame sections.

The finished sections are welded to the mounting plates, which in turn are welded to the posts. All welds are cleaned, carefully ground and covered with primer-enamel or paint.

Made of red stones /120*190*380/ of different textures, a column of root crushed stones /280*190*380/, Dallas Brooklyn photo 1

Made of red concrete blocks /120*190*380/ of different textures, a pillar made of crushed concrete blocks /280*190*380/, Dallas Brooklyn photo 2

Made of white blocks /120*190*380/, column of white crushed cameos /280*190*380/, Odessa, Dallas, photo 1

Made of white concrete blocks /120*190*380/, column of white crushed stones/280*190*380/, Dallas, photo 2

Made of white blocks /120*190*380/ of different textures, a column of white crushed stones /280*190*380/, Dallas, photo 1

Made of gray blocks /120*190*380/, column of gray stones /280*280*190/, height 2.4 m, Dallas, photo 1.

Of cream blocks /120*190*380/ smooth rows alternate with crushed stones, a column of cream stones /280*280*190/, Dallas.

Made of yellow concrete blocks /170*170*360/, concrete pillar blocks /320*320*170/, Dallas, Kryzhanovka

Made of yellow blocks /120*190*380/, column of brown crushed cameos /260*190*380/, Dallas, Nerubai photo 1

Made of yellow blocks /120*190*380/, column of brown crushed cameos /260*190*380/, , Nerubai photo 1

Made of yellow cameos /120*190*380/, pillar made of brown crushed blocks /260*190*380/, Nerubaiskoye, photo 2

Made of sand blocks /120*190*380/ of different textures, a pillar made of brown concrete blocks Lenposelok, Dallas.

Made of gray concrete blocks of different textures /120*190*380/, pillar made of gray wide blocks of different textures /280*190*280/, gray covers /480*350/, Dallas, Lines

Fence made of white torn blocks /120*190*380/, pillar made of white crushed stone /260*190*380/, Dallas

Spans made of sand concrete blocks /120*190*380/, pillar made of sand concrete blocks /280*280*190/, Dallas. Height 2 m.

Spans of yellow smooth and brown chipped blocks /120*190*380/, column of brown chipped cameos /260*190*380/, Dallas

A fence made of sand stones /120*190*380/ of different textures, a pillar made of brown regular blocks /280*280*190/ Dallas photo 3

Made of brown and red concrete blocks /170*170*360/, pillar made of brown blocks /170*170*360/, Dallas photo 1

Fence made of red blocks, top and bottom row brown /170*170*360/, post made of brown blocks /170*170*360/, Dallas photo 2

Fence made of red blocks, first and last row are brown /170*170*360/, post made of brown blocks /170*170*360/, Dallas photo 3

Fence made of gray concrete blocks /170*170*360/, pillar made of gray concrete blocks /320*320*170/, Dallas

Made of gray stones /170*170*360/, pillar made of gray stone /320*320*170/, photo 2, Dallas

Made of gray and red blocks /120*190*380/, pillar - gray torn stone /380*280*190/

Fence made of sand torn stones, pillars and spans /120*380*190 and 380*280*190/, height 2 m, Dallas

Classic fence made of gray bricks /120*190*380/, post made of gray standard blocks /380*260*190/, Dallas Avangard

Made of gray torn and yellow blocks /120*190*380/, pillar - gray torn stone /380*280*190/

Fence: spans of peach stone, top and bottom rows of brown blocks with curly inserts for ventilation /170*170*360/, brown stone pillar /320*320*170/, Dallas

Classic fence made of white smooth stones /120*190*380/, pillar made of white torn stones /380*260*190/, Tartus, Dallas. The bottom is tiled.

Prepared spans for forged inserts, bottom of span made of sand stones /120*190*380/ and sand parapet, pillar made of sand/torn stones /380*260*190/, Dry Estuary, Dallas

Span made of sand fence blocks /120*190*380/, pillars made of crushed torn brown stones /280*280*190/ Dallas

Beautiful fence made of concrete blocks in travertine color, spans have inserts of crushed stones /120*190*380/, post - /280*280*190/, Lines, Dallas, photo 1

Classic fence made of concrete stones in travertine color, spans with inserts made of crushed blocks /120*190*380/, posts - /280*280*190/, Lines, Dallas, photo 2

Made of sand smooth and torn stones /120*190*380/, pillar - sand torn blocks photo 3

A span of four rows of white smooth blocks and three rows of crushed white concrete blocks /120*190*380/, pillars of white torn concrete blocks/280*280*190/, village, Dallas

Pillar made of brown regular blocks /280*280*190/, spans made of sand smooth and textured blocks /120*190*380/ Dallas

A fence made of gray ordinary concrete stones /120*190*380/, pillars made of black torn blocks. Parapets and caps made of black concrete, Dallas

Fence made of brown and red concrete stones /170*170*360/, pillars made of brown concrete stones /170*170*360/, photo 3, Dallas

Span in the form of a pattern of torn and smooth cream blocks /120*190*380/, column - gray crushed stone /280*280*190/, Nati, Dallas

A standard high gray fence to protect the property from the back and sides. Made of gray smooth blocks /120*190*380/, pillar made of gray blocks /280*280*190/, fence height 2.4 m, Dallas

White made of concrete blocks of different textures, fence height 2.4 m. Spans are regular and torn stones /120*190*380/, pillar - white torn block, Dallas, Fountain photo 1

White fence made of concrete blocks of different textures, height 2.4 m. On the side, the material is cheaper, spans are made of gray smooth, pillars are standard gray, Dallas, Fountain photo 2

The fence is made of identical yellow concrete blocks /170*170*360/, the pillar is made of the same yellow blocks /170*170*360/, Fountain, Dallas

A simple fence made of even pink blocks, a post also made of pillar pink blocks /280*280*190/, fence height 1.8 m, Forest, Dallas

Beautiful fence in the shade of coffee with milk. Plolets with a pattern of chipped stones /120*190*380/ red parapet, column of chipped blocks /380*380*190/, Vapnyarka Dallas

Standard fence made of gray smooth stones /120*190*380/, post - gray regular block /280*280*190/, Fontanka, Dallas

Installation of gates and wickets

The final stage - you can already install the gate and wicket fastening. We manufacture and install gates of any type - swing, sliding, roller, lift-and-turn with free-standing or mortise wickets.

Profiled steel sheet is a sheet with a thickness of 0.3 to 0.8 mm with an anti-corrosion coating. The following are usually used as protective: galvanization, polyester, plastisol, PVDF or Printech. This is an aluminum-zinc coating that imitates the texture of wood. Prices for profiled sheets also vary in wave height and length of the working surface. Such fences have the following advantages: strength and durability.

Asbestos-cement supports

Such pillars are presented in the form of pipes based on safe chrysotile asbestos and Portland cement. Supports of this type have become popular relatively recently and their main advantage is their low price. In addition, asbestos-cement structures are lightweight, which allows for quick installation. They are suitable for lightweight fencing (for example, from a chain-link mesh). The main disadvantage of the pillars is their increased fragility (with any mechanical impact, the structure can break).

Gallery of wooden fences made of timber and slats in Dallas.

Pillars made of pine timber /80*80/, board spans /70*20/. Treated with an antifungal mixture, then covered with stain and varnish, Dallas.

Wooden fence made of beech beams and boards. Post timber /80*80/, spans planed board /120*25/. The wood is covered with stain and polyurethane varnish.

The fence is made of beech slats /80*20/, metal posts are decorated to look like wooden columns /100*100/. The wood is treated with a preservative and foot, Dallas.

Standard wooden fence between houses: posts - pine beams /80*80/, spans pine board /120*20/. A pattern is inserted at the top to reduce wind load, Dallas.

Original wooden fence with additional inserts on top. Material pine, posts - steel pipe /80*80/ decorated with boards, the main part of the fence is made of boards /140*30/ additional rail /40*20/

The wall was decorated to look like a wooden fence, an alder board /80*25/ was used, treated with cherry stain and polyurethane varnish, Dallas

Magnificent beech wooden fence, all posts and fastening boards are located on the back side. All slats are treated with stain and polyurethane varnish, Dallas.

Stylish wooden decor made from ash slats has a beautiful appearance and is in harmony with the surrounding nature. The height of the fence changes as you approach the gate, Dallas.

Methods of installing fence posts
In principle, installing fence posts does not require any special construction skills. However, it is necessary to take into account a number of factors that affect the durability of the structure. The most important of these are the type of soil, the properties of the material used, and the average annual weather conditions in the region. In addition, it is imperative to adhere to the technology of the selected installation method.

Before installing the supports, special attention should be paid to the degree of soil heaving during the winter cold. This indicator largely depends on the depth of soil freezing and the level of groundwater. Based on such data, the depth of the pillars is selected and the most suitable material is selected for them. The depth of burying the posts is calculated based on the height of the enclosing structure, its windage, and the level of soil freezing (for heavy fences, the underground part of the support should be approximately 20 cm below this indicator). It should be noted that to increase the reliability of the support, the underground part should be at least 1/3 of the height of the post.

Four methods of installing supports are used in the construction of fences. This is ramming, backfilling, partial or complete concreting.

Beautiful metal fence with elements of forged patterns. The pillars are a metal profile 80*80, the spans are the main material: a square rod 20*20, decorated as a forged product, Dallas.

Metal span in a stone fence. The main material is steel rod 25*25; decorative elements are made by casting, Dallas.

A classic fence made of metal rods 25*25, relatively inexpensive, usually ordered if you need to fence off a large area, Dallas

Forged insert into a fence made of concrete blocks. Reshaped design gives the fence an elegant look, Dallas

A beautiful pattern for wrought iron fences, gives even a simple span an elegant look, Dallas

An inexpensive option for a metal fence made from simple elements, but it looks very nice, Dallas

The simplest metal fence: post - profile 60*60*2, span round rod with a diameter of 20 mm and steel corner 30*30 mm, Dallas

Modern concrete fence with metal inserts in the form of slats, gates and wicket are also stylized, Dallas

Ranch style metal fence. This style is easily visible from the outside, but is resistant to high wind loads.

A fence made of metal siding has many advantages: low price, full coverage, factory metal processing and ideal appearance.

An original fence made of galvanized metal panels, height 1.8 m. Works great in areas with strong wind loads.

A fragment of a forged fence; this technology is also used in the restoration of fences that are more than 50 years old.

Contact us!

Construction of metal, wood and concrete fences in Dallas.

Call us, our specialists are ready to answer any of your questions. If for any reason you cannot call or did not get through, write to us and we will call you back!

+1710-000-0000
+1710-000-0000

fence00@gmail.com

Address:

USA, Dallas